NYC 9/11 Public Portal Document
PPS-Generators
10. Except where modified by a specific notation to the contrary, it shall be
understood that the indication and/or description of any electrical item in the
drawings and specifications for electrical work carries with it the instruction to
furnish, ins'ull and connect the item as part of the electrical work regardless of
whether or not this instruction is explicitly stated.
11. It shall be understood that the specifications and drawings are complementary and
are to be taken together for a complete interpretation of the work. Where there
are conflicts between the drawings and specifications or within the specifications
or drawings themselves, the items of higher standard shall govern.
12. To the extent that they govern the basic work, the specifications also govern
change order work if any.
13. No exclusion from or limitation in, the symbolism used on the drawings for
electrical work or the language used in the specifications for electrical work shall
be interpreted as a reason for omitting the appurtenances or accessories necessary
to complete any required system or item of equipment.
14. The drawings for electrical work utilize symbols and schematic diagrams which
have no dimensional significance. The work shall, therefore, be installed to fulfill
the diagrammatic intent expressed on the electrical drawings, but in conformity
with the dimensions indicated on the final working drawings, field layouts and
shop drawings of all trades. In particular, information as to the exact size,
location and electrical connection points for mechanical equipment shall be
derived by reference to HVAC and Plumbing documents.
15. Certain details appear on the drawings for electrical work which are specific with
regard to the dimensioning and positioning of the work. These are intended only
for general information purposes. They do not obviate field coordination for
individual items of the indicated work.
16. Information as to general construction and architectural general construction and
architectural features and finishes shall be derived from structural and
architectural drawings and specifications only.
17. The use of words in the singular shall not be considered as limiting where other
indications denote that more than one item is referred to.
18. Ratings of devices, materials and equipment specified without reference to
specific performance criteria shall be understood to be nominal or nameplate
ratings established by means of industry standard procedures.
OEM PPS-5 Generators
7 WTC March 20, 1998
NYC-WTC_000166880
OCR can misread numbers and units. Confirm readings against the page image before using them.