Door product specifications, undated

NYC 9/11 Public Portal Document 09/02/98 18:08 FAX 2122190286 SWANKE HAYDEN CONNELL Mord 004 Product , Shor! Spectfications « IM Listed Level 3 1, Door Ta be constructed of oallistic aluminum in narrow stile design. Door tc be ® Angdized or Painted Finish 2 3/8" thick, Vertical stilan are 3 2/4" wide. Al! joints and connections shall be « Glazing Factory Instatied tyght, previding hairine joints and true alignment of adjacumt members. « Standard Sige - 90" x 710" 2. Commer joinery shail consist of heavy duty extruded and keyed aiuminum corne, splines with continugus 3/1" diameter tie rad construction. Ooar openings will area transparent and opaque armors ranging in thickness from 3/4" Lo 1 3 Framing tc be constructed of ballistic lumirum, Framing size 2 1/2” by 41/2". 1, Door To be constructed of ballistic aluminum in narrow silla design. Door to be 4 3/4" th.ck, Vertical stiles are 3.1/2" wide. All joints and connections shall be tignt, providing hairline joints and true alignmen: of adjacert members. 2, Corner joinery shall consist of heavy duty extruded and keyed aluminum corner splines with continuous 3/8” dlameter tie rod constuction. Door openings will accept transparent and opaque armors ranging in thickness from 3/4” to 2 1/4". 3 Framing to be constructed of ballistic alurninum, Framing size 2" by 4 1/2". 1. Door is ta be constructed using a iumbar core fined with 4 centinugus sheet of « Unfinished - Ready for Stain WIJ Type 1 fiberglass, Exterior to be laminated or pained according to customer @ Glazing Pactory Installed faquiraments. ; ; « Aluninum Frame 2 Frame to be 1 3/4" x 4" aluminum tube badisticaily protected. Frames to be ~ Stendard Size - 3°0" x 7'f” completely tabricated and shipned for field installation, Ail joint connections to have concealed shear block to provide a -igid assembly when installad. ae ayo o Ul Usted Level + . Doors are to be manufactured of the hignest quality 14 gauge beltistic staal, @ Steel Door Construction Door thickness 7 3/4", All doors shail be of fui) flush construction and shall have » Prime painted er factory pabiied Jontinucius one pieey 22 gauge vartical steal rib stiteners Spaced not to exceed i six (6) inches apart. Lack rai! to be ons 0) piece full height 14 gauge channel, « Standard Sie-7O"x70" =|. Hinge rai! to be one. (1) piece full height 14 gauge channel formed, reinforced . and tapped for hinges. Both channels to be continuously are welded to face Tl ’ "Sheets full height. Bath top and bottom of duars are io receive 16 gauge closu, | i 7 channels, Doors shall have beveled (1/8" in 2") lack edge, , Gaor framing shal be of 14 gauge ballistis steal. Frame size 2” x 5 3/4". | { : adbolt Lockset, J Neavy Weight Hinges, yoy wy gd iH Door closer: | by nor closer, o UL Listes Level 3 . Doors are constructed of ballixtic steel plates, and staal tubes 4 3/4” thick. Door « Steal Door Construction frame assembly is constructed of Jormed sieel plates. Framing dimensions are ¢ Primepaiatedor factory pairted 2” wide x 6 3/4" deep. Vertical jambs, door stops and transoms contain buitet finishes registant material consistent with door unit. Ail seams of the door and trame are « Standard Size - 30" x 7'0” protected in the sare Manner. Door trames are commoletely fabricated al factory and shipped with doors attached. The door stop is built into the frame. 5 2, All door ard frame joint connections are weldad to previde a rigid assambly venti yt | | (| iW Tn | when Installed i}, | : 3, Each door is equipped as follows: Door closer per door, Stanly hinge. All oiner rf oe hardware must be specified. ‘eae ors | « High Power Rifle Bullet Hesietiag . Door Is constructed of ballistic stes! alates, 1 1/4" square stee! tube and flat Protection = UL Level 3 stock, Qoor thickness is naminat 1 4/4”. Dour frame assembly @ constructed of # Steet Doar Constrection formed steel plates. Framing dimensions are 2” x 6 3/4” deep. Vertical jambs, door stone and trarsoms co‘tain bullet resistart material aqual to the value of the doar unit. Door frames are completely fabricated st ‘actory and shipped with doors attached, 2. All door and tame joint connections are weided x provide a ‘ord assembly when Wstalled. 3. Each coor is equipped as follows: LON closer per door, Russwin deadbolt 1ack- set, Roton hinge. All other hardware must be ececified. © High Power Rifle Bullet Resisting *, Door is construsted of ballistic steel plates 4 1/2” square steel tube and flat Protection - 7,.6200M & §.5601M stock Door thickness is nominal 2" Goor frame assembly 5 cofstructed of #15 Minute Forced Entry Pretaction formed steel plates. Framing dimensions are 1 4/4" x § 7/2" deep. Variical # Stee! Door Construction jambs, door stops and transoms contain bullet resistant rnalerial equal to ine © Standard Size - 70" x 70" valua of the door unit. Door frames are completely fabricated at factory and t shipped with doors atached. 2, Au door and (rame joirt connections are weided to provide a rigid assembly when instalied. 3. Each door is equipped as follows: LCN cioser per door, AR Forced Entry Woks; Roton hinge. All other hardware must be specified. wh, Insulgard Corporation Transparent equipment utitize GE Plasdics LEXGARB Laminates for Ballistics Protection NYC-WTC_000167926