Insulgard quote form for WTC bullet doors, May 1998

NYC 9/11 Public Portal Document

INSULGARD CORPORATION Bullet Resistir Product Da HM544 BULLET RESISTING DOOR SYS FEATURES U.L. LISTED LEVEL 3

11 GAUGE FACE SHEETS

CONTINOUS HINGE PREPAfWiTlON

CLOSER REINFORCED

COMPLETE HARDWARE OUTFITTING HALF-Lfte VISION PANEL 3' 0" X 7' 0" a. 3' 0" X 6' B" FULL OPAQUE DOORS AVA AND, CUSTOM SIZES AND STYLES AVAILABLE

DOOR AND FRAME SHIPPED AS COMPLETE UNIT

VERTICAL-Lire DOOR VIEWER USE OF GE PLASTICS LEXGARD® IN VISION LITE OP i

PRODUCT DESCRIPTION BASIC USE LIMITATIONS

The Insulgard HM544 Bullet Resisting Door Use of this door system is to provide protection This door has been designed to meet System is designed to defeat ballistic assaults in those applications where a ballistic attack 3 ballistic resistance standard as set from a .44 Cal. Magnum handgun per testing threat exists. Such applications are often in Standard 752. It is recommended tha under UL standard 752 at Undewriters convenience stores, law enforcement facilities, user should determine his ballistic thr Laboratories. hospital pharmacies and many other "at nsk"risk" determine the correct product to mee facilities. that threat. The door is a hollow metal swing type for Interior and exterior use, and standard door usage. It is recommended that these door be used in conjunction with protected wall areas. CONSTRUCTION SIZES AND OPTIONS SPECIFICATION

Doors are to ba full flush construction of 11 Door Thickness: 1 3/4" A, Door Construction - Doors are constr;.- f ; . gauge ballistic steel face plates arc welded to 14 Platea, and ateel tubes l 1/2" thick. gauge Interior lock and hinge rails. Each door Frame thickness; 2" X 6 3/4” will have 14 gauge vertical steel stiffeners. Top E. Door Frame Construction ■ Door framr conatructed of formed steel plates. Fremin and bottom of door to receive 14 gauge closure Standard door stzes: 36"X are Z' wida X 6 3/4" daep. Door frames a; Channels. 94" fabricated at factory and shipped with do 36"x 90" All door to be pre-tested tor all lock!; Door framing will be constructed of ll gauge (other sizes & styles available - 4 weeks) clearances, and ease of operation, to ballistic steel and be offered in types for drywall Inslailaboft easier. All Joint connections e and masonry openings. provide a rigid assembly when installed. Vt Door rough opening size; 401/2" x bb 1/4“ door stope and traneoms contain bui'a material equal to the value of the door uni;. Door hardware (standard) will be: Door shipping weight: 600 lbs the door and frame are protected In the n Continuous hinges The door stop Is built Into Ihe frame. CL LCN closer Silencers are used et the look lamb. Krar", r drlllad to accept 1/4" anchors IB" O.C Optional Hardware - Hardware materials shall provided to taka up a space at eaci> DOOR HANDING CHART diagrams are shipped enclosed In be of a type listed above, unless otherwise packages. requested. Contact your nearest Insulgard (INSIDE) Corporation representative for additional c. Hardware Assembly optional hardware Information- LH RH LH R«v«n« RH Rtuont Each door l9 equipped as follows; Finish - All doors and frames furnished prime Right H*n4 Luff Hand SnvN Baval Door closer per door; Deadbolt lockse. hinge, AH other hardware must be spedHa-. painted, ready for final finish in field. Option; Factory applied polyurethane enamel can be provided, standard colors as selected.

INSULGARD CORPORATION 5133 Lawrence Place» Hyattsville, MD 20791* 900-630-6710 « 301-927-8055 • Fax 301-9. 3. Revised 2/23/96

6/e'd TES'ON dao? ayysmsNi WdZe:F 8S6T‘T NYC-WTC_000172426