Insulgard quote form for WTC bullet doors, May 1998

NYC 9/11 Public Portal Document IS ’

INSULGARD CORPORATION BuHel Res/'sfm Product Di ___ 7g USD5 BULLET RESISTING DOOR SYS

FEATURES HIGH POWER RIFLE RESISTANT, 7.62MM & 5.56M1' HEAVY DUTY STEEL CONSTRUCTION EXTERIOR GLASS COMPONENT EASILY REPLACE’ 10 SECURITY GLAZING FACTORY INSTALLED jP DOOR STYLES COMPLETE HARDWARE OUTFITTING DOORAND FRAME SHIPPED AS COMPLETE UNIT □

OPAQUE HALF-LlTE VISION PANEL PRODUCT DESCRIPTION BASIC USE LIMITATIONS

The Insulgard USD5 Bullet Resistant Door This door system would be used to provide This door has been designed to : Series Is designed as a rugged but simple protection in those areas likely to be rigid specifications developed bi door system capable of defeating multiple attacked by a mob or terrorists. Government. It is recommended impacts of 7.62mm NATO and 6.56mm Applications are likely to be at main end user determine the ballistic. projectiles as defined by applicable U.S. security access control points and at other forced entry threat and determir., Government Standards. Tested to UL 752 designated egress points, correct product to meet that thrc Standard, Level 8. It is recommended that this door system USD5 Bullet Resistant Door is a Ballistic testing conducted at H.P. White be used in conjunction with equally forced entry resistance door. In; Laboratory. Inc., Street, MD. USA. protected wall areas. of an extra deadbolt lock will sup medium duty forced resistance. CONSTRUCTION SIZES AND OPTIONS SPECIFICATION si Doors are to be full flush construction of Door thickness; 1 3/4" A. boor Conitructlon steel plates and 11/4" steel tube. Vertical Frame thickness: 2" X 6 3/4" Door Is conslructsd of steel plates, 11/4"; tube and Hei! stock. Door thickness Is nom!. jambs and transom to contain bullet Standard door sizes: 36"xe4" Joint connexions are weldad to provide a i resisting filler material equal to protection Door rough opening size; 401/2 "x 861/4" when Installed, level of the door. Door shipping weight 900 lbs B. Door Prams Construction All joint connections are welded to provide (Other sizes and styles available, consult Door frame assembly Is constructed of fc' plates. Framing dtmansions art 2" wide x a rigid assembly when installed. All doors fgctory) Door frames are completely fabricated at' are pretested for checking locking Finish Options shippad with doors attached. All door to b functions, clearances and ease of All doors and frames furnished prime painted, all locking functions, clearances, arid eai - operation. ready for final finish in field. Optional finishes to make neia installation easier. Al Joint o.. can be provided to Include factory applied welded to provide a rigid asssmbiy when !■ Vertical Jambs, door stops and transoms i Standard Hardware: polyurethane enamel, architectural metals or resistant material equal to Iha value of Continuous Hinge plastic laminates. seaniB of the door and frame are proten'- ■ Russwin Deadbolt Lockset Glazing Options manner. Tia door stop Is built Into the frt.r: LCN Closer Glazing materials furnished by Insulgard shall be ara pradrilled to accept 3/6" anchors 16" C a type tested and approved by H.P. White “P « Optional Hardware: Laboratory, Inc. for bullet resistance. Size to be q Hardware Asaembly Electric Strike limited to 20 1/2" X 30 3/4" vision area.Each door la equipped as Follows; Panic Device (INSIDE) LCN closer per door; Russwin deadbolt ।. Other Specialty Hardware Continuous Hinge. All other hardware nv speCined. Consult factory representative for further LH RH LH Rawn* RH Ravaraa Information. Hight Hand Lift Hand Baval Baval

DOOR HANDING CHART

INSULGARD CORPORATION 5133 Lawrence Place. Hyattsville, MD 20781a 800-638-6718.301-927-0855 a Fax 3014 Revised 2/23/96 6/S*d TEB’OH ddOD aausnnsNi wdseit bset’t ■ NYC-WTC_000172428