Air sampling protocol document, 130 Cedar Street, Jan 2005

NYC 9/11 Public Portal Document

130 Cedar Street July 15, 2004 Selective Demolition and Façade Restoration Koenen Associates

Corrections Noted" or "In General Conformance With Design Concept Except As Noted", provided such action will expedite construction and noted corrections are adhered to. If fabrication is not made strictly in accordance with corrections noted, the Item shall be rejected in the field, and the Contractor will be required to replace such work In accordance with corrected submittals.

10. Submittals marked "Revise and Resubmit" or "Rejected":

a. When submittals are contrary to contract requirements or too many corrections are required, they shall be marked "Revise and Resubmit" or "Rejected". No work shall be fabricated under this mark. The Architect shall list his reasons for rejection on the submittals or In the transmittal letter accompanying their return. The submittals must be corrected and resubmitted for approval.

11. All shop drawing and samples shall be identified as follows.

a. Date of submittal. b. Title of project. c. Name of Contractor and date of his approval. d. Name of subcontractor or supplier and date of submittal to Contractor. e. Number of submission. f. Any qualification, departure, or deviation from the requirements of the Contract. g. Federal Specification or ASTM number where required. h. Such additional information as may be required by the Specifications for the particular material being furnished.

12. If the Contractor wishes to deviate from the materials or details as shown in Specifications or Drawings, he shall submit the proposed deviation with shop •

drawings and/or samples stating the extent and the materials or details being replaced. The Contractor shall also submit information on the allowed credit or extra cost required for the proposed deviation, and also all information relating to the work of other Sections revised by the proposed deviation.

13. The Architect will review and approve shop drawings and samples for approval with reasonable promptness, but only for conformance with the design concept of the work and with information, contained in the Contract Documents.

14. Incomplete shop drawings will be returned without checking for proper submission, and this shall not be considered as cause for delay of the work or extra compensation to the Contractor.

15. The Contractor shall submit appropriate transmittal forms with every submittal of Shop drawings, manufacturer's literature, and samples. All sepia reproducibles shall be rolled on cardboard tubes for resubmia. The Contractor shall submit all required shop drawings, manufacturer's literature and samples in accordance with the procedures outlined below.

16. Unless otherwise specifically directed by the Architect, make shop drawings al l

accurately to a scale sufficiently large to show all pertinent features of the item and Its method of connection to the work.

•

Submittals 01300-3

NYC-WTC 000125120