Pre-hung door specification sheet with dimensions and ratings

NYC 9/11 Public Portal Document

.U.U;. 2.^1 /{OU !• UN I ANA HE I AL 1^012/013

3 - OVERLY BLAST DOORS - SHORT FORM SPECIFICATION GUIDE

Fire rating; Those openings scheduled as fire rated shall have been tested by and beai the labels of Undei-writers E.aboratories marked for 3 hour, A label for flush doors and 1-1/2 hour, B label for doors with a vision lite, (Maximum vision area: 100 square inches). Note: Some restrictions apply, ('onsull Overly Manufacturings Company.

The lockset shall be Overly Manufacturing Company Doiiible Aught Series Single Point Mortise l ockset [Latchset] equipped with a solid siainles.s steel latchbolt. Functions as specified. The lockset shall be suitable for use with project masterkeyed key Cylinders were specified.

The folluwin^ functions are available: Overly Double Aught Series Mortise Locks

NUMBER LOCK FUNCTION AND GRADE (•) 0022 ANSI F14 Grades 1,2 and 2L (-) 0024 Fed. Spec 86B « Use "S" prefix for standard lock. (-) 0025 ANSI F01 Grades 1, 2 and 2L Use "A" prefix for armored lock. («) 0034 ANSI F16 Grades 1, 2 and 2L Use "H" prefix for armored front and (») 0039 ANSI F02 Grades 1. 2 and 2L wrench resistant escutcheon's. («) 0042 ANSI F09 Grades 1, 2 and 2L (•) 0045 ANSI FOS Grades 1, 2 and 2L («) 0048 ANSI F10 Grades 1, Zand 2L If electric operation is required add (•) 0066 ANSI F04 Grades 1, 2 and 2L suffix "F" for failsafe (unlocked) (•) 0069 ANSI F07 Grades 1, Zand 2L and "PL" for failsafe (locked) (•) 0061 ANSI F13 Grades 1, 2 and 2L function. (.) 0067 ANSI F12 Grades 1, 2 and 2L ("■) 0069 ANSI F02 Grades 1, 2 and 2L

Hydraulic Closers [ if required] shall conform to ANSI Standard Al 56,4

Hinges shall be heavy duty ball bearing butts of sufficient size and quantity to withstand blast loadings and door weight Hinges shall confqpu to ANSI Standard Al56,1.

2.2 Fabrication

A. General: Assemble work using all welded construction conforming to the applicable requirement.5 of AW.S Dll

B. Materials: Construct from fonned sheet conforming to ASTM A366 or ASTM A569. Steel plate and shapes foi reinforcing and/or framing members shall conform to ASTM .A36 and bans shall conform to ASTM Al 08 Grade 1018. Hardware shall be corrosion resistant steel of the appropriate design for the function intended.

r NYC-WTC_000166820