Con-Lux Enamelite Jet Black Paint MSDS, Jun 1992

NYC 9/11 Public Portal Document

CON'LUX MATERIAL SAFCTY DATA SECTION VI - REACTIVITY DATA

STABILITY: Stable CONDITIONS TO AVOID: INCOMPATIBILITY (Materials to avoid): Extreme heat, sparks Oxidizing agents. or open flames. HAZARDOUS DECOMPOSITION PRODUCTS: May produce hazardous fumes when heated. HAZARDOUS POLYMERIZATION; Will not occur.

SECTION VII - SPILL AND LEAK PROCEDURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Eliminate al ignition sources. Wear appropriate personal protection equipment and approved respirator. Prevent material from contacting any wate sources or sewers leading to surface waters.

WASTE DISPOSAL: Dispose of in accordance with Federal, state and local regulations.

SECTION VIII - SPECIAL PROTECTION INFORMATION

RESPIRATORY PROTECTION: In outdoor or open areas, where sufficient ventilation has been determined to exist, a respirator is generally not required. In restricted ventilation areas, a NIOSH/MSHA approved organic vapor respirator is recommended.During spray application,a respirator providing both organic vapor and spray mist protection is recommended. VENTILATION: In confined spaces mechanical ventilation is required to keep the air contaminant concentration below current applicable OSHA permissible exposure units. PROTECTIVE GLOVES: Impervious type required for long or repeated overexposure. EYE PROTECTION; Use safety eye wear to protect against splash of liquids. OTHER PROTECTIVE EQUIPMENT: Prevent prolonged skin contact with contaminated clothing. HYGIENIC PRACTICES: Wash hands before eating, smoking or using washroom facilities.

“Engineered Products For Heavy Duty industrial & Commercial Protection NYC-WTC_000169070