Material Safety Data Sheet for Con-Lux Product 548

NYC 9/11 Public Portal Document

I

CON'LUX* MATERIAL SAFETY DATA I? PRODUCT CODE 548

SECTION VI - REACTIVITY DATA

STABILITY: Stable CONDITIONS TO AVOID: INCOMPATIBILITY (Materials to avoid): Extreme heat, sparks Oxidizing agents. or open flames. HAZARDOUS DECOMPOSITION PRODUCTS: May produce hazardous fumes when heated. HAZARDOUS POLYMERIZATION: Will not occur.

SECTION VII “ SPILL AND LEAK PROCEDURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Eliminate ai: ignition sources. Wear appropriate personal protection equipment and approved respirator. Prevent material from contacting any watei sources or sewers leading to surface waters.

WASTE DISPOSAL: Dispose of in accordance with Federal, state and local regulations.

SECTION VIII - SPECIAL PROTECTION INFORMATION

RESPIRATORY PROTECTION: In outdoor or open areas, where sufficient ventilation has been determined to exist, a respirator is generally not required. In restricted ventilation areas, a NIOSH/MSHA approved organic vapor respirator is recommended.During spray application,a respirator providing both organic vapor and spray mist protection is recommended. VENTILATION: In confined spaces mechanical ventilation is required to keep the air contaminant concentration below current applicable OSHA permissible exposure units. PROTECTIVE GLOVES: Impervious type required for long or repeated overexposure. EYE PROTECTION: Use safety eye wear to protect against splash of liquids. OTHER PROTECTIVE EQUIPMENT: Prevent prolonged skin contact with contaminated clothing. HYGIENIC PRACTICES: Wash hands before eating, smoking or using washroom facilities.

"Fnninat^r/^r/ Prnr/iirtf: Fnr Hfiaw Dutv Industrial & Commercial Protection” NYC-WTC_000166384