Material Safety Data Sheet for epoxy thinner, 7 World Trade

NYC 9/11 Public Portal Document

■MSD-S luip://www. bcnjamiiimooic.com/msds/MSDS/M95.hli

for ingredient data and concentrations). Mechanical exhaust may be required in confined areas. Discharge exhaust only in area away from ignition sources.

PROTECTIVE GLOVES; Solvent impermeable gloves are required EYE PROTECTION; Splash goggles or safety glasses with side shields. OTHER PROTECTIVE EQUIPMENT: Clothing adequate to protect skin. HYGIENIC PRACTICES: Remove and wash clothing before reuse. Wash hands before eating, smoking or using the washroom.

SECTION IX - SPECIAL PRECAUTIONS

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Flammable - Keep away from heat, sparks and flame.

OTHER PRECAUTIONS: Use only with adequate ventilation. Avoid prolonged contact with skin and breathing o internally.

SECTION XX

HMIS (Hazardous Materials Identification System) (R) NPCA

HMIS is a recognized workplace Hazard Communications System as required by OSHA (29 CFR 1910. 1200). Information on establishing a compliant hazardous communication program using HMIS is available from:

/American Labelmark Co., Inc., Labelmaster Division 5724 N. Pulaski Rd., Chicago, IL 60646 1-800-621-5808

The ratings assigned by Benjamin Moore & Co. are only suggested ratings; the contractor/ employer has ultimate responsibility for HMIS rating where this system is used.

Personal Protection: This code is left blank on Benjamin Moore & Co. MSDS's as it depends on application technique and the workplace ventilation. Please read Sections II through IX of this MSDS before deciding on appropriate protective equipment and beginning work. There are codes available for this section which can be obtained from Labelmaster.

This product contains at least one toxic chemical listed in Section II that is subject to the reporting requirements of section 313 of the Emergency Planning and Community Right-To- Know Act of 1986 and 40 CR 372.

3 of 3 1/29/01 8:59 AM NYC-WTC_000169050