NYC 9/11 Public Portal Document
130 Cedar Street July 15, 2004
Selective Demolition and Façade Restoration Koenen Associates
UNIT MASONRY •
PART 1.00 -GENERAL
1.01 GENERAL REQUIREMENTS
A. Work of this Section, as shown or specified, shall be In accordance with the requirements
of the Contract Documents.
1.02 WORK INCLUDED
A. The work of this Section Includes all labor, materials, equipment and services necessary
to complete the unit masonry work as shown the drawings and specified herein,
on
Including but is not necessarily limited to the following:
2. of concrete masonry unit walls io'4,
3. Metal joint reinforcing, anchors, ties, weeps, and related accessories for masonry.
4. Chases, recesses, pockets and openings In masonry/terra cotta as required for
Installation of work by others.
5. Building in of items furnished by others into masonry, including access doors,
door frames, anchors, sleeves and inserts, and other similar items to be
embedded In masonry.
6. Grouting In of metal items built into masonry work.
•
1.03 RELATED WORK
A. Furnishing loose lintels - Section 05500.
B. Sealant - Section 07900.
C. A Lstr+&r.M + a-4i ate—' Scc "t c
1.04 SUBMITTALS
A. Samples (Submit the following):
1. Each type of face brick in sufficient number and color to show full range of color
and shade. Submit certification that brick meets ASTM standards specified. f,
a. Submit samples of all special shapes required showing color range and
sizes.
2. Joint reinforcing, each type, width and proposed locations (labeled).
3. Anchors, wedges and ties, each type; width and proposed locations (labeled).
4. Joint filler, each type.
5. Flashing, Including splice sample, 12" x 12".
B. Manufacturer's literature: Submit technical and installation Information for
•
Unit Masonry 04200-1
NYC-WTC 000125158
OCR can misread numbers and units. Confirm readings against the page image before using them.