Remediation plan cover page, 30 Warren Street, January 2006

NYC 9/11 Public Portal Document

Regulatory Submittal Part IV- Waste Sampling & Management Plan Fiterman Hall 30 West Broadway, New York, New York Airtek Project 05-0867 — January 10, 2006

manifests, placards, etc. All wastes will be shipped using properly permitted vehicles operated by drivers with Commercial Drivers Licenses (CDLs) and Hazardous Materials endorsements. All hazardous waste will be shipped using transporters with RCRA identification numbers. The actual modes of transportation to be utilized will be determined following the identification of all anticipated waste streams and will take into account the location and distance to the selected disposal facility as well as cost considerations. All off-site shipments of waste will adhere to the site-specific transportation requirements. As required by NYSDEC (6 NYCRR Part 364) all hazardous and asbestos wastes will be transported using Part 364 permitted haulers.

Shipments of PCB waste must be in properly labeled and marked containers, the waste must be shipped under a properly executed manifest and Land Disposal Restriction (LDR) form, and the transporter must have a valid EPA Identification number and a valid New York State Part 364 transporter permit, as well as the latest version of U.S. Department of Transportation's Emergency Response Guide (2004). The vehicle in which PCB wastes are being shipped must be properly placarded and marked to reflect that it is transporting PCBs and must also be marked with the New York State waste transporter permit number on its sides and rear.

8.0 Travel Routes

Travel route(s) will be determined following discussion with the appropriate regulatory agencies (e.g., New York City Department of Transportation), and the Lower Manhattan Construction Command Center (LMCCC). The selected waste transporter(s) will follow the designated travel routes. Proposed routes are illustrated in Attachment B - These routes cannot be finalized until EPA approval of the project, as the timing and routing are interdependent on other project occurring in the area.

9.0 Disposal Facilities

Waste recycling/disposal facilities will be selected based on several factors including waste types, facility acceptance criteria, regulatory compliance history, etc.

Potential facilities to be used include:

Asbestos: Meadowfill Landfill Route 2, Box 68, Bridgeport, WV 26330 Permit # SWF-1032/WVO109193

Lead: Recyclable

RCRA Exceedance: Republic Environmental Systems 2269 Sandstone Dr., Hatfield, PA 19440

16

NYC-WTC 000096534