Silica XRD analysis results, 114 Liberty Street, Apr 2003

NYC 9/11 Public Portal Document

I rM4/23/200B 11:31 185&8589551 EMSL ANALYTICAL PAGE 01 4 ■■ I I I I I I ____________ ■ I ■ EMSL Analytical, Inc.

■ I 107 Haddon Avt., Wtstmont, NJ 00108 Eh/IBL I Order ID:Q40305286 Attn: Andrew/ M.N, Khan Customer ID: JLCC50 ILC Environmental Consultants, Inc. Customer PO; 200 Park Ave South, Suite 1001 Date Received: 04/05/03 12-.23 AM New York, NY 10003 Fax; 212-420-6092 EMSL Order; 040305286 Project; #03-2744/NYCDEP—114 Liberty ST EMSL Project ID: Report Date: 04/14/03 Date Analyzed; 04/14/03

Silica, Crystalline Analysis Performed X-Ray Diffraction (XRD) Modified NIOSH Method 7500, Issue 3,1/15/98

j Respirable Dust Airborne Silica Sample Sample Silica Silica % Analytical Sample ID Identification Particle Volume Weight Cone. Weight Cone. Silica Sensitivity ID (P (mg) (mg/m^) (wg) {mg/m’) (mg/m’)

MB 13687-1 12THFLR SOUTH Quartz 408 <0.002 M/A <0.0045 <0.0110 N/A 0.0110 MB 13687-2 1ITH FLR DINING Quartz 408 <0.002 N/A 0.0090 0.0221 N/A 0.0110 MB 13687-3 lOTHFLR DINING Quartz 408 0.601 1.4730 0.0080 0.0196 -LL OONO MB 13687-4 9TH FLR DINING Quartz 408 0.014 0.0343 0.0090 0.0221 64.3 OOHO MB 13687-5 STH FLR DINING Quartz 408 <0,002 N/A <0.0045 <0.0110 N/A 0.0110 MB13687-6 7TH FLR DINING Quanz 408 0.010 0.0245 <0,0045 <0.0110 45.0 0.0110 MB 13687-7 6TH FLR DINING Quartz 408 0.090 0.2206 <0.0045 <0.0110 5.0 0.0110 MB 13687-8 5TH FLR DINING Quartz 408 <0.002 N/A <0.0045 <0.0110 N/A 0.0110 4TH FLR MB 13687-9 KITCHEN Quanz 408 0.115 0.2819 <0-0045 <0.0110 3.9 0.0110

Disclaimer; The laboratory can only verify the concentration of silica on the filter and not the final concentration due to data obtained by non-laboratory personnel. In the absence of a bulk dust sample, neither the specific forms of crystalline silica nor the interfering species can be fully determined. Hence, the amount for each phase, if anticipated, will be analyzed based on primary, secondary, and/or tertiary peak data with comparison to calibration curves of known standards. It should be noted that air samples are meant for only quantifying silica (or a mineral phase) which must first be identified from a bulk dust sample, “<” means less than the stated value. The lowest reportable value is equivalent to the Analytical Sensitivity that is calculated from the lowest reproducible amount of specific mineral detectable by the instrument.

Anant Samudra, Ph.D, Analyst Stephen Siegel, CIH- Lah Manager Or other approved signatory

AIHA Accredited - Laboratory ID HI00194 Page 1 of 3

CONFIDENTIAL, SUBJECT TO PROTECTIVE ORDER NO. 1, J AN. 2013 CITY_DEP_WORBY_CANNATA_SUBP_000008884

NYC-WTC_000177534