,,-.^1 public portal Documen.
I
DIVISION 2 - SITE WORK
'.t±a SECTION 2A
MAINTENANCE OF TRAFFIC AND WORK AREA PROTECTION
'I PART 1 - GENERAL
• (I
1.01 GENERAL REQUIREMENTS
The Contractor shall provid all barricades and all lights re
quired in the performance of the Contract, The protecton of the
'construction area shall conform as a minimum, to the standards
outlined in the "Manual on Uniform Traffic Control Devices for
Streets and Highways - Part VI" issued by the U. S. Department
of Transportation, Federal Highway, Administration with the fol
lowing additions:
1. All barricades shall be painted orange and white as speci
1 fied in 2.02 of this Section; however, the color combina
tions shall not be intermingled.
2. No torches or lanterns shall be used.
3. All Flashers used on or adjacent to the roadways and con
struction areas shall be acceptable for use only if they are
exactly as manufactured by one of the approved manufacturers
listed in 2.01.
PART 2 - PRODUCTS
1 2.01 MATERIALS
A. Flashing Lights
1. Fixture for low intensity shall be one of the following:
a) Model No. 650-4507-W6 or 670-4907-W6 as manufactured
by Dietz Visi-Flash.
b) Model No.1 TSPD-1408-68-2 PAPEBT as manufactured by
Julian A. McDermott.
c) Stock No. FL503 as manufactured by Flexible Safety
Flasher.
d) Product No. 209 as manufactured by Selecto-Flash.
^C-WTO_UUUlbo./8
OCR can misread numbers and units. Confirm readings against the page image before using them.