dust contaamir'ation of building
The ASTM method is intended for guidance on examining
no suggesaon
surfaces and 1s intended as a general assessment of the building. Thor* is
from asbestos
in the ASTM method that it can be used to assess general health risk
exposure. nor does it suggest that all budding surfaces be mainQained to the levels
the
published in the standard. The method is genes 11y applicable for the es irriate of
1000 fibers per
concentration of asbestos fibers on surfaces starting from approxlmattIY
square eearimeter (f/em2)
to determine
On December 3M two surface dust samples were t ken from the 1& floor
asbestos
whether asbestos fibers were settled on stvf ocs. The results are reported in
fibers per square oendmeter of surface tested. The following smmnwizes the sample
results:
Sau,plc Cd20204 sampled in living room from able top
Result- 740 asbestos 8t:uatutse per square cemtim*tet
Samp10 E12O3-2 sampled from supply air diffuser in the 10* floor public hallway.
Result -550000 asbestos atnicttlre8 per square centimeter
asbestos fibers
The supply air guile in the hallway was found to have elevated levels of
well above the zeootttmeaclad limit of 1000 strucanes per square centimeter. This
atlggcsta that the ventilation system was votminsted by asbestos when the
building
collapsed.
using
The duct system should be deemed by a professional duct cleaning company
vacuum and cleaning equipment designed fQr asbestos deoantaaaiaatLOD.
Si y~
Edward Olmsted
12/11/01 TUB 14:06 ITX/91 Nn AARAI Vhnnh
DEC-12-2001 1721 1212 637 3561 P.05
LWNYC0308310
NYC-WTC 000125805
OCR can misread numbers and units. Confirm readings against the page image before using them.
NYC-WTC_000125805Source: NYC Law Department, mirrored locally