I
ANALYSIS
I ATC ASSOCIATES INC. — TEM
10/25/01
LAB GROUP #: 5762 -
Operator
Filter Type MC£ 25 mm
Lab Sample No. 62219
Filter Area 385 mm"2
Client Spl. No. 5 Disk No .
Grid J.D.
Instrument I.D. EM 10 CRX Comments
GO Area M~~
400X to 70 s/mm"2.'
Screen Magnification 16 6
i q 7''1 Struc Corspd
No. GO to be Analyzed
Acc. Voltage 80 kV
EDS
Structure Type
Length
g I.D. of Structure Nor ✓ (Nonasb.
GO. Structure X0.5 um Amphibole Nonasb. Ambig./ND Elements!
No Coord. No. FIB C M C um >. 5um Chr s.
I
I
I
I
1
I
1 Photo No. from 1 In 5 asbestos—
containing samples)
Slruct. = > 0.5um & > 5:1 Aspect Ratio
Identify all structure' min BDS
Grid acceptance:
<507L undissolve tar,
Check
diefru tip 70r as ucs (ld 4)
overlapped or fold0
<10% part[culata coverage >50% coveragesquare
pattern) at leant 20 unfolded or overlapped
grtd
TQta S
1
C > 5um
M. Not Observed (SOS spectrum or dlffraaLLon <5% holes or o a tie areas
F B M
properties conforming
Positive diffraction pattern Unused portion
Chrysotile
✓c to laboratory identification criteria observed. of niter
0.73nm el for (020) rensehons. Av flog pertlea
For ebrysoUlof Uno repeat. streaking of
0.53nm spacing for the layer of filter
of (110) and (100) reflections. Portion of niter (2mm wide) Amphibole
Ua of lss: 0.09am Dyer Ito. rope■1, and a to roe. subject to
Use .pot .pain{ to sasminaticn
3.5 reUo of es -twlnead V (.sanm)•
layer line repast distance
Ambiguous
conforming to laboratory AMPHIBOLES
✓' EDS spectrum criteria observed.
identification Amosite
F= Single Fiber (1-3 intersections = 1-3 fiber.) zemm ratter Crocidolite Non — asb estos
!tsar diameter apart)
Ba Bundle (>3 fibers <1 Anthophyllite
C= Cluster (>9 lntar cUons) Stoppi ng Ru les. _ ^ , ^.. o
NYC-WTC 000104097
OCR can misread numbers and units. Confirm readings against the page image before using them.
NYC-WTC_000104097Source: NYC Law Department, mirrored locally