G
ATC ASSOCIATES INC. - TEM ANALYSIS
LAB GROUP #: 5761 - 10/25/01
Filter Type MCE 25 mm Operator
Lab Sample No. 62207
1 Client Spl. No. 34
Instrument I.D. EM 10 CRX
Screen Magnification 16.400X
Filter Area 385 mm"2
Grid I.D.
(GO) Area 0.0L124 mm2
Disk No.
Comments
( 4.721 Struct. Corspd. to 70 s/mm"2
1
No. GO to be Analyzed 6
Ace. Voltage 80 kV
EDS
N or t /
Length I.D. of Structure
GO. Structure Structure Type (Nonasb.
No Coord. No. . 5urn Chr s. Amphibole Nonasb. Ambig./ND Elements
F 9 C M < D5 um
//t/ .mss
—
Y ~' —v
spe~j
Identify all structures using SOS Check diffraction for asbestos
`Photo No. (from 1 in 5 asbestos- structures u to 70./?lm (tat 4)
containing samples) Grid acceptance:
K undiaaolve
<50% r, overlapped or fold. Toa
Struct. = 0.5um & > 5:1 Aspect Ratio <101t particulate coverage >50% coverate
No Not Observed (EDS spectrum or diffraction pattern) at least 20 unfolded or overlapped grid squares
✓ <5% holes or opaque areas
Positive diffraction pattern properties conforming
to laboratory identification criteria observed. unused portion
For cbrywul.: o.73um epaei for (020)resection.. of filter Chrysotile
0.53nm spacing for the layer Ilne repeat. streaking Avoided portion
of (110) and (130) renectlon.. of filter
Portion of sltrr (2mm ride)
Fw amphlbete■: 0. nm layer line repeat. and appros. subject to Amphibole
7.5 ratio of non-twinnned layer line spot .pacing to summation
layer line repeat distance (0.57nm).
EDS spectrum conforming to laboratory AMPHIBOLES Ambiguous
identification criteria observed.
Amosite
F= Single Fiber (1-3 intersections = 1- 3pafibers) 25mm filter Crocidolite Non —asbestos
B= Bundle >3 fibers <1 fiber diameter a rt)
c= cluster (>3 intersections) 5~ypiug Ru1ae: Anthophyllite
r= N■trl: >20 ./c.o. or in lit + c.D. Tremolite Non —Identified
NSD= No Structures Detected 4rtinolite
NYC-WTC 000104217
OCR can misread numbers and units. Confirm readings against the page image before using them.
NYC-WTC_000104217Source: NYC Law Department, mirrored locally