ATC ASSOCIATES INC. - TEM ANALYSIS
LAB GROUP #: 5761 - 10/25/01
Lab Sample No. 62194 Filter Type MCE 25 mm Operator ~P ~~
Client Spl. No. 21 Filter Area 38 mm 2
Instrument I.D. EM 10 CRX Grid I.D. Y~ `7 i Disk No.
Screen Magnification 16,400X (GO) Area 0.01124 mm^2 Comments
Acc- Voltage 80 kV No. GO to be Analyzed 6 ( 4.721 Struct. Corspd. to 70 s;m
LI GO. Structure Structure Type Length I.D. of Structure N or/ EDS
(Nonasb.
No Coord. No. 30.5 um Chrys. Amphibole Nonasb. Ambig./ND Elements)
F B C M < 5 um 3 5um
—c---
—
I
I
Li
I
cr.. 11 ..nreneaiad aectra-
Photo No. (from 1 in 5 asbestos- Identify all structures using BDS Check diffraction for asbestos
containing samples) Grid acceptance: structures up to 70.(&m (1st 4)
<50% undiseolve r. overlapped or o e
Struct. = > 0.5um k > 5:1 Aspect Ratio <IOx particulate coverage >50% coverage Totals
squares
N= Net Observed (209 spectrum or diffraction pattern) at least 20 unfolded or overlapped gri
<5% holes or opaque areas
Positive diffraction pattern properties conforming
to laboratory Identification criteria Unused portion
For ehr7seUlr. 0.flnm apucin[ i for (020) ruflsetions, of (liter Chrysotile
0.57am spacing for the layer tine repeat. streaking Avoided portion
or ( to) and (100) r%Reeuona. of filter
For amphibolae: 0.00em layer line repeat. and appros. (2mm aide)
0.0 rsUo of eon-twinned Isyer line spot spacing to
Amphibole
p
layer line spat distance ( a0nm).
l/= 603 spectrum conforming to laboratory Ambiguous
identification criteria observed. PHIBOLES
observed.aFil-Arricsite
Fe Single Fiber (1-3 Interactions = 1-3 fibers)
B= Bundle (>0 fibers <1 fiber diameter apart) 25mm filter Crocidolite Non —asbestos
C= Cluster (>3 Intersections) 9top~R,1— Anthophyllite
lIeMatrix
> a/. Tremolite
NSD= No Structures Detected Non -Identified
Artinolite
NYC-WTC 000104204
OCR can misread numbers and units. Confirm readings against the page image before using them.
NYC-WTC_000104204Source: NYC Law Department, mirrored locally