LI
ATC ASSOCIATES INC. - TEM ANALYSIS
LAB GROUP #. 5761 - 10/25/01
Filter Type MCE 25 mm Operator
Lab Sample No. 62190
Client Spl. No. 17 Filter Area 385 mm
Grid I.D. y~_ J~ Disk No.
Instrument I.D. EM 10 CRX
(GO) Area 0.01124 mm'2 Comments
Screen Magnification. 16.400X
No. GO to be Analyzed 6 ( 4.721 Struct. Corspd. to 70 s/mm
Acc. Voltage 80 kV
I
I.D. of Structure N or,/ EDS
GO. Structure Structure type Length (Nonasb.
No Coord. No. F B C bI <_5 Ufn 3 5um Chrys. Amphibole Nonasb. Ambig./ND Elements
LP Al,
2 (~
rl
b rr
1
- -..e r.- ..~,..en. Store all unreaeated spectra-
- rnoLo no. t[rom i m u .. v.. w. - .. ....1 -.. ------
-- -- • --- stru
containing samples) Grid acceptance: structures up to 70.1 m (LL 4)
<50% uadissolve r. overlapped or o e
Struct _ O.Sum & > S:1 Aspect Ratio <LO% particulate coverage >50% coverage Totals
squares
Na Not Observed (EOS spectrum or diffraction pattern) at least 20 unfolded or overlapped grid
<5Z holes or o ■ sae area
= positive diffraction hero properties conforming
to laboratory identification criteria Unused portion
For ehryasulu 0.77nm .pate[ for (020) r.n.euon..
or flit., Chrysotile
0.03025 spacing for the layer lLos repeat. streaking Avoided portion
I of (110) and (130) r.ncuona.
For am bibela: 0.53nm t• .pproe.
ling repeat. and a
3.5 ratio of non-intoned layer sane sp
layer lion ropat distance (0.53nm).
Ells specCrum conforming to laboratory
sp■ci g
of niter
(2mm .ids)
PHIBOLES
Amphibole
Ambiguous
identlticaUon criteria observed.
aba.rv.d.&7ii-Amosite
P= Single Fiber (1-3 interactions a 1-3 fibers)
B= Bundle (>3 fibers <1 fiber diameter apart) 2emm niter Crocidolite Non —asbestos
C= Cluster (>3 intersections) gtypping Ruin Anthophyllite
Ma Matrix >so ./c.o. or to sat ♦ c.o. Tremolite
NSO= No Structures Detector Non —Identified
A.-+innlitP
NYC-WTC 000104201
OCR can misread numbers and units. Confirm readings against the page image before using them.
NYC-WTC_000104201Source: NYC Law Department, mirrored locally