NYC-WTC_000232959

NYC 9/11 Public Portal Document

Table 12 Highest Amount of Materials Measured in the Indoor Settled Dust of Each Building Building Number Quartz Gypsum Asbestos SVF (%)"’*■ (%)“’

Comparison locations 31-34 2J 4J Non-Detect Non-Detect 1 31 J 30 J Non-Detect 20 2 23 J 14 J Non-Detect 27 3 Not Sampled Not Sampled Not Sampled Not Sampled 4 14 J 9J <1 15 5 11 J 9J <1 20 6 27 J 20 J <1 15 7 21 J 15 J Non-Detect 5 8 28 J 17 J Non-Detect Non-Detect 9 25 J 16 J <1 7 10 3J 0.8J 1.5 20 11 2J 2J 1.5 Non-Detect 12 4J 1J Non-Detect 5 13 0.05 J 1J Non-Detect 10 14 0.03 J 2J Non-Detect 5 15 0.4 J 1J <1 5 16 Non-Detect 0.9 J Non-Detect Non-Detect 17 2J 2J Non-Detect 18 0.9 J 1J Non-Dctcct 35 19 1J 2J Non-Detect Non-Detect 20 0.9.1 1 .1 Non-Detect Non-Detect 21 0.9 J 2J Non-Detect Non-Detect 22 14 J 2J Non-Detect 3 23 2J 1J Non-Detect Non-Detect 24 0.03 J Non-Detect <1 10 25 Non-Detect 2J Non-Detect 5 26 0.7 J 2J Non-Detect 5 27 0.04 J 1J <1 10 28 Non-Detect 1J Non-Detect 10 29 1J 2J Non-Detect Non-Detect 30 1J 4J Non-Detect Non-Detect a. Minerals were measured by XRD. Quartz is considered representative of the relative presence of portlandite and calcite (all are associated with concrete). b. Asbestos value represents the highest of the PLM and TEM result for each location. c. ■SVF is synthetic vitreous fiber and was measured by PLM. d. Results shown are estimated values, indicated by “J.” e. % = weight of mineral per weight of dust. f. % = roughly area of fibers per area of dust.

63

CITY_21MC100_011171500

NYC-WTC_000233031