NYC-WTC_000231701

NYC 9/11 Public Portal Document

Stuyvesant High School Chambers Street, New York, NY SCA Project #;M477-15217, LLW#: 29881

Elevator Shaft(s) Cleaning and Testing Protocol

1. Prior to any cleaning work being performed inside the elevator shaft, each set of elevator doors on every floor ( not being used to access the elevator car and/or shaft ) shall be sealed with a loose diaphragm consisting of two layers of six- mil plastic sheeting sealed with tape.

2. A licensed elevator mechanic shall secure the elevator car at the highest elevation of the elevator shaft. The HVAC .cleaning contractor shall clean the elevator pit area using wet methods and/or HEPA vacuurn.

3. Under the supen/ision of a licensed elevator mechanic, the HVAC cleaning contractor shall clean all accessible interior surfaces of the elevator shaft and accessible exterior surfaces of the elevator car using wet methods and/or HEPA vacuum.

4. A visual inspection of all cleaned surfaces will be conducted to ensure they no visible dust/debris remain.

5. At the conclusion of a successful visual inspection, all accessible interior surfaces of the elevator shaft will be sealed with a clear-coat encapsulant.

6.- The ceiiiiY<’ac<;ess''ha^^^^^ the eievatcf<'caf'-v;i(i bla 'opjentcF; 'a'nd' th'eX’ar will ascend and descend the shaft a number of times. Two air samples will then be collected inside the elevator car to be analyzed for asbestos (TEM AHERA) and airborne lead (NIOSH 7082).

CI TY_2 IMC10 OlO 1018935 O’

NYC-WTC_000231701