NYC 9/11 Public Portal Document
ATC ASSOCIATES INC. TEM ANALYSIS
LAE GROUP ti: 10 -•-20/01
Sample No . Type MCE 35 ;iim (ioei-ator
cent Spl, No r ArcCt J55 luiu
Instrument: I.D. E.M IP D;isk No
Scree.u Magnification (GO) Area 0.01124 mm' Ccmmencs
Acc. Volcage S3 kV No. GO co be Analyzed 4 147 Struct:. Corscd. Lc 70 s/mr.^z.j
Length I.D. of Structure EDS
jSO;___ Structure Structure Type (Nonasb.
No Coord. No. >0.5 um
3E (g F B C M < 5 um > Sum Chrys. Amphibole Nonasb. Ambig./ND Elements)
-
7W /(
Stare all unrepeated spectra—^
Photo No. (from 1 in 5 asbestos- Identify all etructurea ueing EDS Check diffraction for aabeatoa
containing samples) Grid acceptance:! structures up to TOs/An (ut ♦)
<5056 undisaolved filter, overlapped or folded
Struct. = > O.Sum ik > 3:1 Aspect Ratio
<tOX parUcuiate coverage >50% coverage Totals
N= Not Observed (EDS spectrum or diffraction pattern) at least 20 unfolded or overlapped grid squares
Positive diffraction pattern properties conforming <SX holes or ooaoue areas F B C M Sum
lx> laboratory identlflcalion criteria observed. luied portion
for chrysotile: O.Tanm spacing for (020) reflections. of niur Chrysotile
l.SDnm spacing for the layer line repeat, streaking -Avoided portion
if (110) and (130) reneeUona. of filter
?or amphiboles: O.SSnm layer lilts repeat, and approx. Portion of niter (Emm wide)
3.3 ratio of non-t»lnncd layer line spot spacing to subject to Amphibole
Layer line repeat diatance (0.&3nm). sxamineUon
SDS spectrum conforming to laboratory
identification criteria observed. AMPHIBOLES Ambiguous
F= Hingis Fiber (1-3 intersections = 1-3 fibers) Amosite
Bs bundle (>3 fibers < 1 fiber diameter apart) SSmni rutar Crocidolite Non-asbestos
C- Cluster (>3 Interacctlonsi —----- 1 Slopping Rulas; 1------- Anthophyllite
Ms Matrix I >30 s/C.O. or in 1st 4 C.O.
NSD: No Structures Detected Tremolite
Actinolite Non-Identified
LXDATAXPRIVATrvMlKKCXCADtrTSMa 0/22/01
CONFIDENTIAL, CITY_21MC100_003470242
SUBJECT TO PROTECTIVE ORDER NO. 2, SEPT. 2008
NYC-WTC_000176442
OCR can misread numbers and units. Confirm readings against the page image before using them.