KBI Systems boardroom and conference room project portfolio

NYC 9/11 Public Portal Document

pgrity says ARCHITECTURAL SPECIFICATIONS All veneers are book-matched from sequence numbered stock with exposed edges banded under pressure. Mitered or tongue and groove joinery is pressure-clamped and glued. All mounting cleats are screwed in place. Bases are joined with spline or miter corners, glued and hand clamped. All finishes are VanSan's exclusive five-coat process, hand sanded and hand rubbed.

Special notes: Standard lecterns: Series 100 & 200 Table top lectern; Model LE-22 These lecterns feature a walnut or oak wood-grain finish (or other specified material), bonded to first quality fiber board with all exposed edges banded under pressure. Mitered or tongue and grove joinery is pressure clamped and glued and all mounting cleats are screwed in place. The Series 200 and LE-22 are specifically carpet covered. Carpet is Vee-Lok® (Oxford style) from General Felt Industries (GFI®), see inset on page 3. Lectern bases are joined with mitered corners, glued and hand clamped.

EQUIPMENT OPTIONS Self-contained AC Sound System The VanSan Sound System consists of the following: 75-watt MOSFET amplifier; one tri-radiant speaker system; one dynamic, unidirectional microphone; one built-in AC power cord. The control panel includes ON/OFF Indicator LED; two microphone volume controls; line volume control; bass/treble control; XLR Connector for a second microphone; two line input jacks for audio source and one output jack for satellite speaker. Specify sound system by adding the letter “G” to the model number (i.e. LE-88G).

Exclusive “Lectrajust” Height Control The VanSan “Lectrajust” height control allows lectern to be A WORD ON WOOD. raised or lowered to any point between 46/2" high to 54/2" high Shown above is a (small) sampling of the 35 varieties of (8 Inches) at the rate of 1" per second. Motor and lift assembly wood veneer that we have used for VanSan lectern finishes. are noise-isolated for smooth, silent operation. A rocker switch Since wood is a natural product, it is to be expected that no controls the motor and features a built-in protection against matter how characteristic a wood is, there will be slight over-run. The motor is enclosed in a locked panel and has a variations in color value and grain pattern from piece to detachable, 3-wire grounded plug and Hubbell socket. piece. Also, translating a piece of wood from the actual Select “Lectrajust” by adding the letter “L” to model number object, to color photograph and then to the printed page (i.e. 1700L-32). creates still further variations. We cannot guarantee a perfect match from printed image to finished product... we Note: VanSan standard finishes are natural oak and walnut. All can guarantee you the finest quality of wood, prepared and other woods are optional. Call for quotation. finished by VanSan’s dedicated craftsmen.

NYC-WTC_000168136