NYC 9/11 Public Portal Document
JLC ENVIRONMENTAL CONSULTANTS, INC.
200 Park Avenue South, Suite 1001, New York, New York 10003
Phone: (212) 420-8119 Fax: (212) 420-6092
Project No.: 03-2744
New York City D.E.P. ELAP Lab Code: 11029 Analyte: FIBERS
59-17 Junction Blvd. NIOSH and AIHA Lab Code: 100273 Date Received: 4/1/03
Flushing, NY 11373 NVLAP Lab Code: 101953 Date Analyzed: 4/1/03
Batch #: 0304A695
SUMMARY OF ANALYTICAL RESULTS - PCM
Site: 114 Liberty Street, New York, NY
SAMPLE #
COLLECTED DESCRIPTION I LOCATION TIME(min) VOLUME(L) FIB/FIELD RESULTS(f/cc)
LAB #
001 During/ Entrance to Bldg.! OWA 600 3643 4/100 0.0005
31-March
A 9705
002 During/ Inside of Bldg./ Northern Side 600 3643 6/100 0.0008
31-March
A 9706
003 During/ Entrance to Bldg./ Rear/ Cedar Street/ 600 3643 3/100 0.0004<LOD
31-March OWA
A 9707
004 During/ Inside of Bldg./ Southern Side 600 3643 6/100 0.0008
• 31-March
A 9708
005 During/ Inside of Personal Decon/ Clean Room 600 3643 7/100 0.0009
31-March
A 9709
006 FIELD BLANK 0/100
31-March
A 9710
Sample Analysis by: <LOD = Less than limit of detection which is 5.5 Fibers/ 100 Fields
Positive Phase Contrast Microscopy (PCM) VOIDI = H.C.P. ( High Concentration of Particles)
VOID2 = Overloaded
Method of Sample Preparation and Analysis:
All samples analyzed in accordance with the NIOSH 7400 Method using "A" Counting Rules. Issue 2, Augu) 1994
'p.. °°
/ f
Instrumentation: ''
.r''.' r a .
F -
Ua ac iwa a
Olympus PCM Model BH-2 with Walton-Beckett Graticule (100um field diameter).
Laboratory Director
Report Date: April 4, 2003
JLC is responsible for only the fiber counts within the limitations of the method described as NIOSH 7400. Among other limitations, this
method gives only an index of airborne fibers and provides only an estimate of asbestos concentration. Any and all claims arising out of
JLC's analysis of these samples are limited in recovery to the cost of analyzing samples. JLC accepts no other liability and the client agrees
to seek no costs beyond the above-
Page 51 of 52
NYC-WTC 000132070
OCR can misread numbers and units. Confirm readings against the page image before using them.