NYC Law Department release
Independent mirror · updated as the City releases more · v1.2.6
← Document results/DEP Box 34/114 LIBERTY STREET 1001041, 52/7502
Document / 12 pages

Asbestos contractor permit application, 114 Liberty Street, 2003

Machine-extracted title · confidence 90%

Permit application for a licensed asbestos contractor to clean interior dust at the unoccupied 114 Liberty Street building.

NYC-WTC_000100690–000100701

Folder label: “114 LIBERTY STREET 1001041, 52/7502

Page image
Scanned page image, NYC-WTC_000100701
OCR text

OCR status: ok · source: pdftotext

NYC 9/11 Public Portal Document

Attachment 1: Reporting Asbestos Sampling Results

1. The laboratory shall submit sample results in tabular format on the laboratory's letterhead. The table must contain, at a minimum, columns with the following headings and information. • Sample Identification Number • Sampling Date • Air Volume Collected • Area Analyzed • Non-Asbestos Fibers • Asbestos Type (s) • Structures 0.5µ<5µ, • Structures 5µ • Analytical Sensitivity (s/cc) • Asbestos Concentration (s/mm2) • Asbestos Concentration (s/cc) • Asbestos Concentration (s>5Wcc)

2. For the TEM analysis, two size fractions should be reported, a fraction that represents fibers >0.5 microns and a fraction that represents fibers >5 microns. The fraction that represents the fibers >5 microns is considered to be the PCM equivalent (i.e., PCMe) that should be compared to the primary clearance value of 0.0009 s/cc. In addition, the asbestos air samples shall be analyzed in accordance with NIOSH 7400 for standard PCM analysis. These results shall be reported on a separate sheet.

Attachment 2: Reporting Dioxin Sampling Results

1. The laboratory shall submit sample results in tabular format on the laboratory's letterhead. The date of sample collection, the matrix (e.g. wipe), and date analyzed must be printed on each page of the report. The table must contain, at a minimum, columns with the following headings and - information. • Sample Identification Number • Analytical Method • Analyte • Result (including units) • Detection Limit • EMPC • Laboratory Flags • Standard Type • Dilution Factor ■ Recovery Limits ■ TEF, max TEF ■ # Isomers

2. Analytical results shall be reported using a 2,3,7,8 -TCDD toxicity equivalence (TEQ). The TEQs shall be reported four ways. A TEQ which sets non-detects to zero (i.e., TEQ (ND=O), a TEQ which sets non-detects at 1/2 the detection limit (i.e., TEQ (ND=1/2), a TEQ Estimated Maximum Potential Concentration with non-detects set to zero (i.e., TEQ EMPC (ND=O), and a TEQ Estimated Maximum Potential Concentration with non-detects set to 1/2 the detection limit (i.e., TEQ EMPC (ND=1/2).

7 of 7 2/7/03

NYC-WTC 000100701

OCR can misread numbers and units. Confirm readings against the page image before using them.

NYC-WTC_000100701Source: NYC Law Department, mirrored locally

Related records

Browse subjects →

Ranked by indexed similarity. Reasons describe shared subjects and filing context; check the source records.

Same-box records

No available related records indexed in this group.

Filed elsewhere

More like this page

Similar subjects in other documents. Similarity does not establish the same event, measurement or conclusion.

Page similarity is temporarily unavailable or this page has no indexed vector.

Buildings in this record

Machine-extracted building matches; verify each source. Buildings, never households.

Others also read

Readers open these alongside this record — through an Ask answer, the same folder, or indexed similarity. Not a claim they are about the same event.

Compare copies and versions →