NYC 9/11 Public Portal Document
|Teanihefrudh6mm~e^^ Pageej]
J
If the building is unoccupied, aggressive (leaf blower, high-power fan) indoor air sampling should
be conducted. If the building is occupied, air sampling should be conducted with the building
HVAC system in continuous operation. After sampling is completed, filters for the HVAC
system, if applicable, should be inspected. If dust is present, recommend filter replacement.
Indoor air sampling will be conducted for: asbestos (NIOSH 7400 and, if an action level is
exceeded, NIOSH 7402), PCMe), respirable crystalline silica (NIOSH 7500), and inhalable,
thoracic, and respirable airborne particulate matter for fi-action analyses of silica, gypsum, mica,
etc. (lOM sampler).
Indoor floor dust sampling will be conducted for asbestos (via TEM as the detection limit for
PLM is 1%); for silica, gypsum, mica (XRD); and for magnesium (EPA Method#). Floor dust
sampling will be conducted using EPA’s Environmental Response Team (ERT) SOP for
household dust collection. Any deviations fi-om the SOP in actual field collection will be
documented by the sampling team.
2. Exterior
Air and settled dust sampling should occur in a grid pattern in residential areas.
Ambient air sampling will be conducted at breathing height for: asbestos (NIOSH 7400 and, if an
action level is exceeded, NIOSH 7402), PCMe ), respirable silica (NIOSH 7500), and inhalable,
thoracic, and respirable airborne particulate matter for fi-action analyses of silica, gypsum, mica,
etc. (lOM sampler). In addition, 24-hour real-time TSP, PMIO and PM 2.5 sampling will be
conducted-again at breathing zone height.
Settled dust samples will be collected and analyzed for asbestos (via TEM as the detection limit
for PLM is 1%); for silica, gypsum, and mica (XRD); and for magnesium (EPA Method #).
6
NYC-WTC_000176046
OCR can misread numbers and units. Confirm readings against the page image before using them.