l.J ATC ASSOCIATES INC. TEM ANALYSIS
LAB GROUP #: 5554 - 09/24/01
Lab Sample No. 59467 Filter Type MCE 25 mm Operator
Client Spl. No. 09-24-26 Filter Area 385 mm^2
Instrument I.D. EP: 10 CRX Grid I.D. Disk No.
Screen 'Magnification 16,4 0 OX (GO) Area 0.01124 mm^2 Comments
Lj ACC. Voltage ' 8C kv No. GO to be Analyzed 6 ( 4.721 Struct. Corspd. to 70 5/mm*~2.)
Length I.D. of Structure n or EDS
GO. Structure Structure Type (Nonasb.
No, Coord. No. ^0.5 um Sum
Lj F B C M < 5 um Chrys. Amphibole Nonasb. Ambig./ND Elements)
f.. i
R,
2
J J”
Jx'
6 — f(
■.... j
'..)
Store all unrepeated spectra—^
Photo No. (from 1 in 5 asbealos- identify all structures using EDS5 Check diffraction for asbestos
containing samples) Grid acceptance:! structures up to TOs/i^im (lai 4)
<50% undiasoivea filter, overlapped or folded
Struct = > 0.5um & > 5:1 Aspect Ratio
< lOX particulate coverage >50% coverage Totals
Nss Not Observed (EDS spectrum or diffraction pattern) at least 20 unfolded or overlapped grid squares
<5% holes or ooaoue areas F B C M Sum
y/= Positive diffraction pattern properties conforming
Lo laboratory identification criteria observed. -Unuaed portion
For chrysotile: 0.7anm spacing for (020) reflections, of filler Chrysotile
0.53nm spacing lor the layer line repeat streaking Ivolded portion
of (XIO) and (130) reflections. of filter
For amphiboles: 0.53nm layer line repeat and approx. Portion of filter (2mm vide)
3.9 ratio of non-Lwinned layer line spot spacing to subject lo Amphibole
layer line repeat distance (O.SSnm). examination
Technical data sheet recording microscopic observations and measurements of fiber structures from air samples analyzed by transmission electron microscopy.