NYC 9/11 Public Portal Document
r
AIR CONDITIONING i KABACK 1 HEATING
---------- ENTERPRISES
SCOPE OF INSPECTION WORK
1. The Scope of Inspection Work consists of the following:
Spring Maintenance
a. Inspect belts and pulleys
b. Check and clean condensate drip pans and drains
c. Lubricate motor, pulley and fan bearings, where applicable
d. Check refrigerant charge
e. Check thermostats for proper operation and settings
f. Check contactors
g- Inspect electrical connection, tighten where necessary
h. Change and furnish air filters
i. Inspect condenser and evaporator coils
Summer Inspection
a. Inspect belts and pulleys
b. Check condensate pans and drains
c. Check refrigerant charge
d. Check thermostats for proper settings
e. Check contactors and electrical connections
f. Change and furnish air filters
Fall Maintenance
a. Check burner operation, where applicable
b. Inspect pilot light/ignition, where applicable
c. Check economizer controls, lubricate dampers
d. Check thermostats for proper settings (if electric
heat - check operation of heating coil and
contact), where applicable
e. Change and furnish air filters
f. Check belts and electrical connections
Winter Inspection
a. Check operation of heat, where applicable
b. Check belts and electrical connections
c. Check thermostats for proper settings
d. Change and furnish air filters
45 WEST 25TH STREET NEW YORK, N.Y. 10010 (212) 645-5560 FAX: (212) 645-8963
NYC-WTC_000173959
OCR can misread numbers and units. Confirm readings against the page image before using them.