NYC 9/11 Public Portal Document
preliminary plans and scope of work ("Preliminary Plans’’) which are annexed hereto as Exhibit
<or listed on said Exhibit C annexed hereto. The Final Plans must (i) be engineering
and architecturally complete; (ii) be coordinated with existing Building conditions and facilities;
(iii) conform to all applicable codes and requirements (including but not limited to terms and
conditions in the professional services requirement document prepared by DRES, i.e., "Guide for
Design Consultant"; (iv) clearly distinguish Tenant’s Initial Work (hereinafter defined) from
Tenant’s alterations, if any; (v) be coordinated and based on the Preliminary Plans; and (vi)
incorporate and elaborate on the Phasing Plan, in order to create a complete set of construction
documents. The Final Plans must be filed by Landlord with all governmental authorities having
jurisdiction. The Preliminary Plans have been approved by Tenant. Landlord and Tenant have
approved (i) Swanke, Hayden, Connell, Ltd. as the architects (the “Architect”) and their Scope
of Services annexed hereto and made a pan hereof as Exhibit —D.
In accordance with the Final Plans, Landlord, at Landlord's initial expen; subject to
Landlord’s Maximum Contribution (as hereinafter defined in Paragraph (I) of this Article) and
except as otherwise expressly specified in this Lease, will cause its designated centraeteeto make
and complete in and to the Demised Premises the work and installations (herein called "Tenant's
Initial Work") specified in the Final Plans.
Within 35 days after the unconditional execution and delivery of this Lease bv
Landlord and Tenant, Landlord shall cause said Architect to arrange for preparation of inrttal
the Final Plans and delivery of same to DRES and the Port Authority and other regulatory
agencies (if any) which require said submission. Landlord shall use its best efforts to have such
preparation and delivery of the Final Plans occur on or prior to , 1998. DRES will
F;\CR\LHC\ 4219.1016\NEWLSE.6 22
NYC-WTC_000169961
OCR can misread numbers and units. Confirm readings against the page image before using them.