NYC 9/11 Public Portal Document
ATC ASSOCIATES INC. - TEM ANALYSIS
2 20 ,
LAB 3ROUF x ❑ -7 1
Lab Sample No 02571 -' T.c MCA •no Oder aCL_
Client Spl. No. 00 Fl:_r Area
Instrument I.D. EM i CRX Grid I.D :\ ) DISK No.
Screen Magnification 16,470X (GO) Area 2.7:_24 ms."2 Comments
Voltage 80 kV No. GO to be Anal;zed 4.72 . Struct. Cr-td = '-i g inn:
Act
L GO.
No Coord.
Structure Structure Type
No. F B C :H <05 m
Length
g
>, 5um
!
!Chrys.! Amphibole
I.D. of Structure N EDS
or,/
(Nonasb.
Nonasb. IAmbig./ND Elements
2- ' - v
-- I----
I
I
I
I
I
I
I
I
I __ii__________
I -Photo No. (from 1 in 5 asbestos-
containing samples)
S tract. _
N= Not
0.5um & > 5:1 Aspect Ratio
Observed (EDS spectrum or
Identify all structures usm EDS
diffraction
Positive diffraction pattern properties conforming
to laboratory Identification criteria observed.
pattern)
IGrad acceptance:
<50% undissolve
<10% particulate coverage >50% coverage
lot least 20 unfolded
Check diffraction for asbestos
structures u to 70s iiim (let 4)
i er. overlapped or (aided
or overlapped grid squares
1<5% holes or o a ue areas
Unused portion
F
Store all unrepeated spectra)
B
Totals
C 't
M _j_ 5um
Far ahry.etile: O.70cm spacing for (020) reflections. at filter Chrysotile
I 0.59nm apamng for the layer line repeat, streaking
of (110) and (130) reflection°.
Aseided portion
f filter
For ampblboles: 0,59nm layer line repeat, and approx. Portion of ❑itar
.ublect to
(amm side) Amphibole
3.5 ratio of non-t,fnned layer tics .pot spacing to esaminaLLon 1
layer line repeat distance (0.50nm).
EDS spectrum conforming to laboratory ~jr-- - ^, Ambiguous
I identification criteria observed.
F= Single Fiber (1-9 intersections = 1-3 fibers)
AMPHIBOLES
Amosite
B= Bundle (>0 fiber, <1 fiber diameter apart) 20mm fitter Croeidolite Non —asbestos
Co Cluster (>9 intersections) Slapping Rule■: ''~ Anthophyllite --~--~
to Matrix
>50 0/0.O. or in Lot 4 G.O. Tremolite
NSDe Na Structures Detected Non —Identified
I L\DATA\PR1VATE\A)XEG\CADD\TEM9 9/22/98
Actinolite
NYC-WTC 000104385
OCR can misread numbers and units. Confirm readings against the page image before using them.